Boat Trailer Winch Webbing: The most practical winching method yet. Strong 2" polyester webbing. End is folded and sewn to fit most winch drums.

38139

R8434

20'

Heavy-Duty Transom Tie Down: High visibility protective pad to guard against hardware scrapes and nicks. Strong 2" webbing strap has a zinc-plated locking clamp with coated attached transom hook. Velcro® closure secures handle and holds excess webbing too. Max recommended 350 lb working load.

47209

S6361

2'

47210

S6362

4'

47211

S6363

5'

Ratchet Transom Tie Down: 4' ratchet tie down is designed for quick release and fast recovery. It also features high visibility padding. Strong 1" web strap has a coated transom "S" hook. Adjusts from 11" to 48". Max recommended 130 lb working load.

42742

R8489

Boat Trailer Winch Cable: Heavy-duty twisted, galvanized steel cable is 3/16" diameter x 20' long. Equipped with a tough iron snap-hook. Thimble in the eye protects cable from abrasion. Cannot be damaged by oil, grease or gas.

11141

R8730

Twisted Poly Pro Winch rope: This 3/8" x 20' twisted polypropylene rope floats on water and is resistant to rot, abrasion, oil, grease, gas, water and most chemicals.

36316

R8529

Braided Winch Rope: This 3/8" solid braid polyethylene rope floats on water and is resistant to rot, abrasion, oil, grease, gas, water and most chemicals. Corners with a heavy-duty snap hook. Does not flatten out under heavy loads on winch.

11119

20' Solid braid poly

11118

20' Solid braid nylon

Puritan Boat Trailer Tie Downs: Rugged 2" wide webbing has excellent strength, but much less stretch than nylon. Also offers outstanding abrasion resistance, with less water absorption and shrinkage than nylon.

36486

R8464

10'

36487

R8465

12'

36488

R8466

14'

36489

R8467

16'

Snap Hook: Forged steel. 3 1/4" x 1 1/2" x 1/4" diameter plated steel. 1375 lb. average breaking strength.

11454

S1103

Snap Hook: Forged steel. 3 1/2" x 1 3/4" x 3/8" diameter plated steel. Max recommended 450 lb. working load.

11453

S1101

Snap Hook: Forged steel. 3 1/4"x 11/2" x 1/4" diameter plated steel. 1" throat opening. Max recommended 300 lb. working load.

11459

S1112

Snap Hook: Malleable iron. 3 1/2" x 2". Safety closure. 600 lb. working load.

11456

S1107

Safety Snap Hook: Spring loaded. For use with 3/8" and 1/2" rope. 4" long with 3/4" eye. Max recommended 400 lb. working load.

29867

S1130

Snap Hook: Heavy-duty malleable iron. 4" x 2 1/4". Spring snap closure. 5400lb. average breaking strength. Packaged for peg display. Max recommended 1350 lb. working load.

11460

S1155

Snap Hook: Malleable iron. 3 1/4" x 1 3/4". opening. Safety closure Max recommnded 125 lb. working load.

11458

S1111

Snap-In Drain Plug: Positive locking, snap-tight action. Adjustable to provide a watertight seal. Won't jar loose under vibration. Brass and neoprene.

36591

M0100

Twist-In Drain Plug: Brass. designed for inside transom use only. Adjustable T-handle for leak proof seal.

29825

M0400

Scissor Hook: Plated steel. 3" x 1 3/4" non-slip hook. Insert pin to lock. 2200 lb. average breaking strength.

11455

S1105

Dock Bumper Strip: Protects both boat and dock with honeycomb construction for good shock-absorption (see close up). Made from pure white PVC. Longer attachment lip makes installation quick and easy.

28592

S2810 W01

1 3/4" x 3 1/2" x 10'

Dock Corner: Provides the same great protection and aesthetics as the standard bumper strip for dock corner posts.

86365

S7441

Boat Fender: Made of tough PVC. Both ends are triple sealed to resist bursting, and have molded reinforced grommets for strength.

80180

S7291

4" x 18"

Permaflex Fender: Made of tough PVC. Both ends are triple sealed to resist bursting, and have molded reinforced grommets for strength.

26028

4" x 18"

26029

5" x 24"

26030

6" x 30"

[ Main ] [ Up ] [ High Performance Vests ] [ Family and Kids Vests ] [ Boating and Fishing Vests ] [ Kneeboards ] [ Wakeboards ] [ Skis ] [ Marine Accesories ]